Hydraulic separators are employed to make the primary circuit hydraulically independent from the secondary circuit to compensate for any differences in flow rate or pressure drops. It is used in heating and cooling systems where there is at least one circulator in the primary and in the secondary circuit.
Main advantages:
- Deaeration of the system with the use of the automatic air vent valve located at the top of the unit.
- Dirt removal due to the large section of the device causing the fluid to slow down and any impurities and sludge to deposit on the bottom, where they can be easily removed with the use of the drain valve.
- The function of the integrated magnet captures and catches the ferrous impurities while the detachable feature of the magnet enables its easy cleaning.
Technical features:
- Threaded connections 1΄΄, 11-4΄΄, 11-2΄΄ and 2΄΄
- Factory assembled thermally insulated casing
- Integrated magnet at the bottom end of magnetic flux density 12,000 Gauss
- Automatic air vent and drain valve
- Operating temperature range: 0 - 100ºC (provided that the fluid is in liquid state)
- Body made of steel Fe360 painted with epoxy powders
- Compatibility with water-glycol mixtures with maximum glycol content of 30%
*Upon request, our company can provide all available Tiemme hydraulic separator types which can be observed in the attached technical leaflet.
. Powered by 
.
